Apple Studio Display 17 (ADC) lines Bedienungsanleitung

User ManualACS-1602Read this guide thoroughly and follow the installation and operationprocedures carefully in order to prevent any damage to the unit

- 8 -ADC-to-DVI AdapterAC PowerPCMacDVIUSB2003-04-22

Port SelectionSimply press the Port Selection switch on the ACS-1602’s toppanel to toggle the KVM focus between the computers (ADC1,ADC2). The Selecte

Powering OffTo power off your ACS-1602 installation, do the following:1. Turn Off the ADC display2. Turn Off the power to the computers. Modifying the

TroubleShootingSymptom Possible Cause ActionKeyboardand/or MouseNot RepsondingLoose Cables Check all cable connections to makesure they are completely

SpecificationsFunction SpecificationComputer Connections 2Port Selection Push Button Switch LEDs Selected 2 GreenOnline 2 OrangeConnectors Console 1 x

Limited WarrantyIN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITYEXCEED THE PRICE PAID FOR THE PRODUCT FROM THEDIRECT, INDIRECT, SPECIAL, INCIDENTAL ORC

Notes- 14 -2003-04-22

Note: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limit

OverviewThe Master View ACS-1602 ADC KVM Switch is a two portcontrol unit that allows access to two ADC equipped Macintoshsystems from a single ADC co

FeaturesMProvides control of two ADC enabled computers from asingle ADC console (ADC Display, USB keyboard, USBmouse).MSupports all 15,17, 22, and 23

Hardware RequirementsConsoleMAn ADC Cinema or Studio Display; or an analog ADC CRT monitorMA USB KeyboardMA USB MouseComputerEither an ADC equipped Ma

ComponentsFront View:1. Port Selection SwitchPress this switch to toggle the KVM focus between the twoports.2. Port LEDsM The On Line LED lights ORANG

Rear View:1. ADC Port 2The cable that connects to the ADC port on the computeryou are designating as Computer 2 plugs in here.2. ADC Port 1The cable

InstallationTo set up your ACS-1602 installation, refer to the diagrambelow and the one on p. 8 as you do the following:1. Plug your USB keyboard and

2. Plug the cable from the ADC display into the Console portconnector of the Master View ACS-1602.3. Use the ADC cables provided with this package to