Apple Power Macintosh (7100 Series) Bedienungsanleitung PDF herunterladen (Seite 57)

3 Plug the other end of the video cable (or adapter) into the S-video output port (

) on

the Macintosh.

If the connector doesn’t slide easily into the port, realign it and try again.

Don’t use force, which could damage the computer or cable.

4 Plug the dual RCA plugs on the audio cable into the left and right Audio In ports on

the VCR.

5 Plug the stereo miniplug on the audio cable (or adapter) into the sound output port (

)

on the Macintosh.

6 Connect the VCR’s Video Out port to the television’s Video In port.

7 Connect the microphone to the sound input port (

) on the Macintosh.

Your finished connections should look like this:

8 Turn on the computer, the VCR, and the television.

9 Select “line input” on your VCR.

See the manual that came with your VCR for instructions on how to select

the line input source.

For further instructions on how to record the computer’s output on videotape

and add voice annotation, see the “Video” topic of Macintosh Guide, available

in the Guide (h) menu.

VCR

Video In

port

Audio In ports

(left and right)

3.5-mm miniplug to dual RCA-plug cable

(available at most electronics supply stores)

Video Out

port

Video In port

Microphone

S-video

output port

Sound

input port

≈

Sound

output port

Connecting Additional Equipment

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 143 144

Keine Kommentare

Apple Power Macintosh (7100 Series) Bedienungsanleitung Seite 57