Apple Studio Display 17 (ADC) Monitor Stand Replacement Bedienungsanleitung PDF herunterladen

073-0592 Rev. A



Apple Studio Display 17 (ADC)

Monitor Stand

Replacement Instructions

Be sure to follow the instructions in this sheet carefully. Failure to follow

these instructions could result in damage to your equipment and may void

your warranty.

Replacing your monitor stand requires ﬁve basic steps:

• Turn off the computer and disconnect the display cable.

• Place the monitor upside down on a thick cloth.

• Remove the monitor stand.

• Install the replacement monitor stand.

• Place the monitor upright, connect the display cable, and restart the

computer.

Note:

Written and video instructions covering customer-installable parts

are available at

http://www.info.apple.com/installparts/.

Tools Required

Two jeweler’s ﬂat-blade screwdrivers are required for this procedure.

Note:

If you do not have jeweler’s screwdrivers, two long carpenter’s nails

can be used. However, the head of the nail must be at least 6 mm wide to

prevent the nail from sliding into the enclosure.

Warning: If any tools or parts drop into the monitor, do not turn on the

monitor. Contact Apple for further assistance. Never turn on your

monitor unless all of its internal and external parts are in place and it

is closed. Operating the monitor when it is open or missing parts can

damage your monitor or cause injury.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Monitor Stand

073-0592 Rev. A  Apple Studio Display 17 (ADC) Monitor Stand Replacement Instructions Be sure to follow the instructions in this sheet carefully.

Seite 2 - Removing the Monitor Stand

2 - Apple Studio Display 17 (ADC) Monitor Stand Removing the Monitor Stand 1. Warning: Turn off your computer and disconnect the display cable as f

Seite 3 - Round Openings

Apple Studio Display 17 (ADC) Monitor Stand - 3 4. In the center of the monitor stand, locate the two identical round openings in the retaining cl

Seite 4

4 - Apple Studio Display 17 (ADC) Monitor Stand 6. Rotate the stand clockwise (1/4 turn) so it is positioned as shown.7. Peer into the center of the

Seite 5 - Positioning the Plastic Rings

Apple Studio Display 17 (ADC) Monitor Stand - 5 8. With the tabs aligned, gently pull the stand toward you. Then tilt the stand up off the base. P

Seite 6 - Correctly Installed

Apple Studio Display 17 (ADC) Monitor Stand - 6 2. Place the clear plastic ring over the white ring so that the white ring ﬁts inside the clear ri

Seite 7

Apple Studio Display 17 (ADC) Monitor Stand - 7 Installing the Replacement Monitor Stand 1. Holding the new monitor stand, align the slots in the

Seite 8

Apple Studio Display 17 (ADC) Monitor Stand - 8 7. Restart your computer. Warning: Never turn on your monitor unless all of its internal and exte

Kommentare zu diesen Handbüchern

Keine Kommentare

Apple Studio Display 17 (ADC) Monitor Stand Replacement Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Monitore Apple Studio Display 17 (ADC) Monitor Stand Replacement herunter. Apple Studio Display 17 (ADC) Monitor Stand Replacement User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Monitore Apple Studio Display 17 (ADC) Monitor Stand Replacement