Apple AirPort Express Spezifikationen PDF herunterladen

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/

SUMMARY

The older generation Apple AirPort Express with a single Ethernet port is NOT recommended for

use with DL Series Mixers. Using this device to provide wireless control of a DL Series Mixer is

not supported nor is it thoroughly tested.

However, because many of these devices are in circulation, we are providing limited instructions

for use. No other assistance or support can be provided. We highly recommend using alternate

Wi-Fi routers such as those described in the DL Series Reference Guide and those listed on the

DL Series website.

BACKGROUND

The older generation AirPort Express sold between June 2004 and June 2012 has only one wired

network port. We will refer to this as a “Single Ethernet Port AirPort Express”. This single WAN

(Wide Area Network) Port is conﬁgured to allow connected wireless clients access to the internet.

There is no conﬁguration where the built in DHCP server will assign an IP address to a client

connected to the one wired network port. This prohibits standard operation with a DL Series

Mixer and is why it is an unsupported device. In order to use a Single Ethernet Port AirPort

Express with a DL Series Mixer connected directly to the wired port, one must disable the built

in DHCP server and allow the wirelessly connected iPad and mixer to auto negotiate a Link Local

IP address. This will result in a much longer time to connect each and every time the system is

used. Below are instructions to set up this conﬁguration.

USING OLDER GENERATION AirPort EXPRESS

FOR DL SERIES MIXER WIRELESS CONTROL

USING OLDER GENERATION AirPort EXPRESS

FOR DL SERIES MIXER WIRELESS CONTROL

1/11

1 2 3 4 5 6 ... 10 11

Inhaltsverzeichnis

Seite 1 - BACKGROUND

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/SUMMARYThe older generation Apple AirPort Express with a

Seite 2 - DOWNLOAD THE AirPort UTILITY

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/Note also at this time you may see an indication next to

Seite 3

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/Now that the system is properly conﬁgured and the Status

Seite 4

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/DOWNLOAD THE AirPort UTILITYTo conﬁgure the Single Ethern

Seite 5

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/After the iPad connects to the AirPort Express, it will t

Seite 6 - Press “Advanced”

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/When prompted with a “Waiting for an Ethernet cable to be

Seite 7 - Press “Router Mode”

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/If you view the device’s Wireless properties by pressing

Seite 8

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/Select the AirPort Express to display a properties dialog

Seite 9

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/Press “DHCP and NAT”.Press “Router Mode”.Change the “Rout

Seite 10

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/Press the back button labeled “DHCP and NAT” at the top l

Seite 11 - BOTTOM LINE

Oct 2013 • All questions, answers and speciﬁcations subject to change.www.mackie.com/support/If there are Status Messages listed in the AirPort Setup