Apple Xserve G5 Betriebsanweisung PDF herunterladen (Seite 17)

Configuring the Xserve G5

PCI Hardware RAID Card

Configuring your PCI Hardware RAID Card and RAID

volume is a four-step process.

You must:

•

Start up the Xserve G5 from the Mac OS X Server CD.

•

Use the megaraid command-line tool to create a RAID volume. Megaraid is a RAID

management tool that can create logical drives using one or more physical drives.

You can also use it to monitor and manage logical or physical drives.

•

Format the RAID volume.

•

Install Mac OS X Server on the new RAID volume.

Starting Up From the Mac OS X Server CD

Insert the Mac OS X Server Install CD 1 into the CD-ROM drive.

With the server power off, hold down the system identifier button as you press the

power button.

Continue holding down the system identifier button until the top row of blue lights

blinks sequentially.

Release the system identifier button.

The rightmost light in the bottom row turns on, signaling that you have selected

option number 1,” Boot from CD.”

Warning:

After you install the PCI Hardware RAID Card, you must completely reformat

your Xserve G5 internal drives and reinstall the Mac OS X Server software. Be sure to

back up any data and system configuration information on your Xserve G5 before

proceeding with the card installation.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Keine Kommentare

Apple Xserve G5 Betriebsanweisung Seite 17