Apple G3 Bedienungsanleitung PDF herunterladen

Replacement Instructions

Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your

equipment and may void your warranty.

Tools Required

• Phillips screwdriver.

• Flat-blade nylon tool.

Electrostatic Discharge (ESD)

Static electricity, a normal and natural phenomenon, builds up on your body as you walk around. You experience an electro-

static discharge (ESD) when you touch an object and feel a spark. ESD can cause damage to the internal components of your

computer. Avoid walking around while performing this procedure, and follow the instructions carefully when you are asked to

discharge static electricity.

Removing the Installed Modem

1. Place your computer on a clean, flat surface.

2. Shut down your computer, remove the battery from the expansion bay, and disconnect the power adapter.

Warning : Always turn off your computer before opening it to avoid damaging its internal components.

The internal components of your PowerBook may be hot. If you have been using your PowerBook, wait 30 minutes after

shutting down your computer to let the internal components cool down before continuing.

3. Make sure that the keyboard locking screw is not in the locked position. Your new PowerBook comes with the keyboard

unlocked, so unless you or someone else locked the keyboard, you can skip this step.

4. Release the keyboard by pulling down on the keyboard release tabs (located to the left of the F1 and F9 keys) until the top

portion of the keyboard pops up.

1PowerBook G3 Series Bronze Keyboard - Modem

English

Modem

AppleCare

1 2 3 4

AppleCare 1

Inhaltsverzeichnis

Seite 1 - AppleCare

Replacement InstructionsBe sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to you

Seite 2

5. Lift the top portion of the PowerBook keyboard up slightly near the top row of keys and pull it back far enough to releasethe small tabs that hold

Seite 3

9. Pull up on the handle and pull the heatsink forward.10. Remove the two Phillips screws on the modem.11. Use a flat-blade nylon tool to lift up the

Seite 4

Installing Modem, Heatsink and Keyboard1. Reinstall the modem and the two Phillips screws.2. Reinstall the heatsink and the three Phillips screws.3. F