Apple AIRPORTCARD - Airport Networking Network Card Technical Information PDF herunterladen (Seite 47)

Solution

Verify you have a functioning wireless ad hoc network by using another wireless

device.

Cause

The HP all-in-one is not turned on.

Solution

Look at the color graphics display on HP all-in-one. If the color graphics display is

blank and the light next to the On button is not lit, the HP all-in-one is turned off.

Make sure the power cord is firmly connected to the HP all-in-one and plugged into a

power outlet. Press the On button to turn on the HP all-in-one.

Cause

The HP all-in-one and computer are on different networks.

Solution

Make sure that your HP all-in-one and computer are on the same network by

verifying that they both have the same IP address and subnet mask. To see the IP

address and subnet mask of your HP all-in-one, print a network configuration page

from your HP all-in-one (see Print and view a network configuration page). For a

description of the items on the configuration page, including the IP address and

subnet mask, see Configuration page definitions. To change the IP address or

subnet mask, see Manage your network.

Cause

Your computer's wireless adapter is not broadcasting its network name (SSID).

Solution

Verify your computer's wireless adapter is broadcasting its network name (SSID).

Print a network configuration page from your HP all-in-one (see Print and view a

network configuration page), and verify that the SSID for the wireless adapter

appears on the network configuration page. If the wireless adapter is not

broadcasting its SSID, see the documentation that came with your computer.

Cause

Encryption settings are incorrect.

Solution

Verify the encryption settings on your access point. The same encryption key and

settings must be used on both the access point and the HP all-in-one.

Chapter 9

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 61 62

Keine Kommentare

Apple AIRPORTCARD - Airport Networking Network Card Technical Information Seite 47