Apple Xserve Einstellungsanleitung PDF herunterladen (Seite 9)

Xserve RAID Take Apart -

General Information

Tools

No tools are required for removing or installing the following parts: hard drive, power

supply, cooling module, controller module, and backup battery. Other parts require only a

Phillips screwdriver. If the system is locked, you will also need the Allen wrench key that

came with the system.

Before Opening Xserve RAID

Unlocking Xserve RAID

If the system is in the locked position (the yellow security LED on the front panel is on),

use the Allen key that came with the system to unlock it.

Shutting Down

You must shut down the system before replacing or installing all parts except the hard

drives, power supplies, cooling modules, and backup batteries. Before shutting down, be

sure to alert users that the system will be unavailable for a period of time.

Warning:

After shutting down the system, you must wait a few minutes before servicing it

to allow internal components to cool.

Electrostatic Discharge (ESD) Precautions

Follow these steps to avoid damage from ESD before working inside Xserve RAID.

1. Shut down the system.

2. Unplug all external cables except the power cords.

3. Touch the Xserve RAID metal case to discharge static electricity.

4. Unplug the power cords.

5. With the help of another person, remove the system from the rack, and place it on a

ﬂat surface, preferably covered by an ESD mat.

6. Put on an ESD wrist strap.

7. To avoid static electricity building back up in your body, do not walk around the room

until after you have ﬁnished working and closed the system.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 68 69

Keine Kommentare

Apple Xserve Einstellungsanleitung Seite 9