Apple Motion 1.0.1 Bedienungsanleitung PDF herunterladen (Seite 4)

for the DAQ hardware and provide a library of functions that MouseRec requires. When

removing this software, these two programs can be identified in the PROGRAM option

under the CONTROL PANNEL from the PC menus and removed. By default, the Start

Menu shows National Instruments products under the National Instruments heading and

the MouseRec program under the mouse_project heading.

4. If you have a USB DAQ, plug it in after the software installation is complete. If you have

a PCI card, turn off the computer now and install it. Turn the computer back on for the

next step.

2. DataAcquisitionandMonitoring

A. StartaDataAcquisitionSession

1. Launch MouseRec either from the start menu or from the location where it was

saved/installed on the hard drive. The window shown in Fig. 1 appears after launching

the program. If the window does not look like this, it may be displaying another tab. You

can click on the Settings/Information tab in that case. The text boxes under this tab are

inactive until the START button is clicked. The information for these boxes is provided

through a series of prompts. The only exception is the Active NI-DAQ Device list. If

more than one NI DAQ capable of voltage measurements is available on the computer,

you will have to select the correct device here before clicking the START button. In this

case the NI-DAQ USB-6225 has been detected and will be used.

Figure 1. Starting window for MouseRec program.

1 2 3 4 5 6 7 8 9 ... 14 15

Keine Kommentare

Apple Motion 1.0.1 Bedienungsanleitung Seite 4