Apple Motion 1.0.1 Bedienungsanleitung PDF herunterladen (Seite 7)

Figure 5. Prompt to enter labels for recorded channels and the light and

dark transition times used during the experiment

6. The program should now initialize and start recording. After a few seconds waveforms

and statistics should begin to appear in the panels under each tab, which are explained in

the following paragraphs. Data acquisition is now underway.

7. When data collection is finished, click the STOP button located directly beneath the

START button in the upper right corner of the window. A new test can then be started, or

the program can be terminated by clicking the X in the upper right corner to close the

window.

B. SelectingandMonitoringaChannelSignal(RawDataTab)

The most recent 6 seconds of the recorded signal for an individual channel can be viewed in the

Raw Data tab shown in Fig. 6. To view a particular channel, the channel number can be typed

into the Channel-to-Analyze text box or incremented up and down with the arrows to the left of

the text box. The y-axis is set to automatic scale by default, causing the signal to span across the

full dynamic range of the plot grid (the y-axis scales to the maximum signal magnitude within

the 6 second window). This can be disabled/enabled by right clicking on the graph axis and

removing/restoring the checkmark beside Autoscale Y.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Apple Motion 1.0.1 Bedienungsanleitung Seite 7