Apple Xserve (Cluster Node) Bedienungsanleitung PDF herunterladen (Seite 17)

To use a second Xserve system and Server Assistant:

1 Shut down your Xserve system and remove its drive module.

2 On a second Xserve system, unmount and remove one of the drive modules (or a blank

module) and insert the drive module from your system.

Note: You should not remove the startup drive module from the second system.

3 Insert the server install CD that came with your Xserve system in the second system’s optical

drive.

4 Restart the second Xserve system from the server install CD using one of these procedures:

m If the system has a tray-loading optical drive, hold in the system identiﬁer button as you

press the power button. Continue holding in the system identiﬁer button until the drive

tray opens. Insert the server install disc and close the tray.

m If the system has a slot-loading optical drive, use the front panel mode to start up from

the optical drive. See “Using Front Panel Mode on an Xserve System” on page 19 for

instructions; use light 1.

5 Do one of the following:

m Use Server Assistant on a remote computer to install the software on the drive module

from your Xserve system. (See “Remote Installation” in Chapter 1 of Getting Started With

Mac OS X Server for details.)

m If you have a monitor and keyboard available for the second Xserve, double-click “Install

Mac OS X Server.”

When software installation is complete, the second system will restart.

6 Quickly remove your drive module from the second system before that system ﬁnishes

starting up.

7 Insert the drive module in your Xserve system and start it up.

8 Use the administration tools on a remote computer to ﬁnish setting up your server.

Starting Up From an External FireWire Optical Drive

If you have an external optical drive with a FireWire port, you can use it to start up your

Xserve system from the Mac OS X Server install disc. Once you’ve started up from the

external drive, you can use Server Assistant on a remote computer to install the software.

To start up from an external optical drive:

1 Shut down your Xserve system.

2 Press the handle of the drive module to open it, which assures that the drive won’t be

recognized during startup.

3 Connect the external optical drive to the FireWire port on the system’s front panel.

1 2 ... 12 13 14 15 16 17 18 19 20

Keine Kommentare

Apple Xserve (Cluster Node) Bedienungsanleitung Seite 17