Apple Xserve (Early 2008) DIY Procedure for Battery Bedienungsanleitung PDF herunterladen

 Xserve (Early 2008)

Rev. A

Battery

Replacement Instructions

Follow the instructions in this document carefully. Failure to follow these instructions could

damage your equipment and void its warranty.

Online instructions are available at http://www.apple.com/support/diy/.

Working Safely Inside the Xserve

Always touch the Xserve enclosure to discharge static electricity before you touch any

components inside the Xserve. To avoid generating static electricity, do not walk around the

room until you have nished working inside the server and have replaced the cover. To minimize

the possibility of damage due to static discharge, wear an antistatic wrist strap while you work

inside the Xserve.

Warning: Always shut down the Xserve and disconnect the power cords before opening

it to avoid damaging its internal components or the components you are installing. Don’t

open the server while it is turned on. Even after you shut down the Xserve, its internal

components can be very hot. Let it cool before you open it.

Tools Required

No tools are required for this procedure. You may, however, nd a small atblade screwdriver

useful in prying up the battery.

Removing the Xserve from a Rack

Alert users that the server will be unavailable for a period of time. 1.

Shut down the Xserve (see the Xserve User’s Guide for help) and then wait to let the Xserve 2.

internal components cool.

Warning: Always shut down the Xserve before opening it to avoid damaging its internal

components or the components you want to install or remove. Don’t open the Xserve

or try to install or remove items inside while it is turned on. Even after you shut down

the Xserve, its internal components can be very hot. Let it cool down for 5 to 10 minutes

before you open it.

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - Replacement Instructions

 Xserve (Early 2008)Rev. ABatteryReplacement InstructionsFollow the instructions in this document carefully. Failure to follow these instructions cou

Seite 2 - Opening the Xserve

Xserve (Early 2008) Battery Replacement Instructions 2Unplug all cables from the Xserve. 3. Note: If you have trouble releasing a cable from the back

Seite 3 - Replacing the Battery

Xserve (Early 2008) Battery Replacement Instructions 3Replacing the BatteryLocate the battery between PCI card riser 2 and the memory cards on the lo

Seite 4 - Closing the Xserve

Xserve (Early 2008) Battery Replacement Instructions 4Insert the replacement battery in the holder with the positive side (+) up and the negative 3.

Seite 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Apple Xserve (Early 2008) DIY Procedure for Battery Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Software Apple Xserve (Early 2008) DIY Procedure for Battery herunter. Apple Xserve (Early 2008) DIY Procedure for Battery User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Apple Xserve (Early 2008) DIY Procedure for Battery