Apple Xserve Intel (Late 2006) DIY Procedure for Thermal Bedienungsanleitung PDF herunterladen (Seite 3)

Xserve (Late 2006) Thermal Grease Kit Instructions 3

Opening the Xserve

Loosen the thumbscrews at the back of the top cover and slide the cover back and up to remove

it. If you have diculty removing the cover, check the enclosure lock on the front panel.

Warning: Even after you shut down the Xserve, its internal components can be very hot. Let

it cool before you open it.

Important: To minimize the possibility of damage to Xserve components due to static discharge,

wear an antistatic wrist strap, if possible, while you work inside the Xserve.

Unscrew the two

captive thumbscrews.

Slide the cover back and lift it off.

Removing the Processor Heat Sinks

Note: Before removing the processor heat sinks, you must remove the airow duct.

Loosen the four screws securing the heat sink that is closest to the DIMM slots (CPU A) in the

order indicated below.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Apple Xserve Intel (Late 2006) DIY Procedure for Thermal Bedienungsanleitung Seite 3