Apple Logic Board Technical Information PDF herunterladen (Seite 57)

2. Execute the file PSEUDO.

A menu will be displayed:

APPLE PASCAL PSEUDO DISK

<1> LOOK AT CONFIGURATION

<2> CHANGE CONFIGURATION

<3> PUT CONFIGURATION IN

ATTACH.DRIVERS AND EXIT

<4> EXIT

a) Select option 2 and modify the slot contents to match your

system configuration, entering the location and type of all the

memory cards in the system. Next, modify the parameters to set

the directory block count (default=4). NOTE: The directory block

count does not include the boot blocks. Thus, 6 blocks are not

available for file storage.

b) Select option 3 of the main menu to install the configuration

in ATTACH.DRIVERS and to write out the configuration parameters

to PARAM.DATA. ATTACH.DRIVERS will then be set up for the given

system configuration.

3. Now transfer the files, SYSTEM.ATTACH (from the distribution

diskette), ATTACH.DRIVERS (from your boot disk) and ATTACH.DATA

(also from your boot disk) to a separate boot disk. These are

all the files that are necessary for installation of the pseudo—

disk.

4. Now cold boot this disk, by turning the power off and back

on again with the newly created boot disk containing

SYSTEM.ATTACH, ATTACH.DRIVERS, and ATTACH.DATA. SYSTEM.ATTACH

will install the pseudo—disk using the files ATTACH.DRIVERS and

ATTACH.DATA which have been set up for it.

5. Now go to the SYSTEM.FILER

, by typing “F”. When the

SYSTEM.FILER prompt line appears, type “V” to get a list of

volumes on line. If all has gone well, you should observe that

the PSEUDO DISK is installed as volume #10, with the volume name

“PSEUDO”.

Every time you boot with your modified root volume diskette,

the PSEUDO DISK will be installed automatically for you. By

transferring the files SYSTEM.ATTACH, ATTACH.DRIVERS and ATTACH

DATA another diskette you will be able to install the PSEUDO DISK

using that diskette.

If any of the memory cards are removed or their locations

changed, it will be necessary to run PSEUDO.CODE again to re-

configure the system. Go back to the original boot disk which

contains PSEUDO.CODE, PARAM.DATA, ATTACH.DRIVERS and ATTACH.DATA,

and repeat steps 2 - 4 above.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 76 77

Kommentare zu diesen Handbüchern

Keine Kommentare

Apple Logic Board Technical Information Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Apple Logic Board