Apple Logic Board Technical Information PDF herunterladen (Seite 66)

1. The PSEUDO DISK must be set up.

2. The PSEUDO DISK drivers must be installed and the

system initialized.

I. SETTING UP THE PSEUDO DISK

This step involves telling the system where the memory cards

are (which slots) and what portions of these are to be used. In

addition, the drive to be assigned as the PSEUDO DISK and the

number of directory blocks to be allocated is also specified.

The following files are required in order to set up the

PSEUDO DISK.

PSEUDO.BAS

PSEUDO .COM

INIT. COM

INIT2 .COM

PARAM. PAT

These files should be transferred to a disk containing the

CP/M operating system, and installed in drive A.

1. Load MBASIC and RUN “PSEUDO”.

2. The following menu will be displayed:

CP/M PSEUDO DISK

<1> LOOK AT PSEUDO DISK SET—UP

<2> SET UP THE PSEUDO DISK

<3> SET UP INIT.COM AND INIT2.COM

AND EXIT

<4> EXIT

WHICH OPTION?

At this point, select option #2. The system will then

display:

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 76 77

Keine Kommentare

Apple Logic Board Technical Information Seite 66