Apple Shake 4 Bedienungsanleitung PDF herunterladen (Seite 12)

The Truelight Viewer

Shake Node

Truelight

Expanding the ‘advanced’ section at the bottom of the panel provides access to additional

controls to compensate for ambient lighting conditions. Adjustments can also be made to the

white point (luminance and colour temperature) of the display:

oneDLUT

Click on this toggle button to replace the Truelight cube transform with

simple look-up tables. This is slightly faster, but it is only accurate for

neutral tones. When this control is enabled the 'showOutofGamut'

control is hidden as it will have no effect.

brightness

The brightness level of the displayed image can be shifted up or down. If

you are working under office lighting, you may want to turn up the

brightness.

flare

When ambient light levels are high, detail in the darker areas of an image

can become difficult to see. Flare correction can be applied to effectively

‘stretch’ the black end of the gamma curve. This is useful when it is

impractical to black out the room. The default value of 0.01 matches the

reference cinema conditions.

whiteLuma

Sets the maximum white output level of the monitor. The default setting is

appropriate for matching cinema conditions. This control is hidden if the

current display calibration does not use it.

whiteChromaU,V

These two sliders adjust the overall colour balance of the monitor.

Changing the ‘u’ value shifts the white point towards red or green.

Changing ‘v’ shifts white towards yellow or blue. The default settings

shown match D65, the white used in video standards. These controls are

hidden if the current display calibration does not use them.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Apple Shake 4 Bedienungsanleitung Seite 12