Apple Power Macintosh G3 Minitower Technical Information PDF herunterladen (Seite 48)

48 Chapter 3

3 If the cover is locked shut, unlock it by removing the security cable or padlock from the

cover latch.

Do not remove the cover yet.

4 If you have never plugged in your computer, make sure the voltage switch is set correctly for

the voltage system to which you will be connecting the computer.

If you don’t know the voltage used in the country you’re in, refer to “Voltage Switch Settings

for Different Locations,” in Chapter 1, “Setting Up Your Computer.”

5 Carefully lay the computer on its side with the cover and button facing up.

Gently lay the computer on its

side on a clean, flat, stable surface.

Button

Set the switch to show “115” for AC voltages in

the 100–120V range. Set the switch to show

“230” for AC voltages in the 200–240V range.

Check to see that the voltage switch on the back

of your computer is properly set before you plug

it in. If you need to change the setting, insert a

small screwdriver in this slot and slide the switch.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 87 88

Keine Kommentare

Apple Power Macintosh G3 Minitower Technical Information Seite 48