search

Apple Xserve (Early 2008) DIY Procedure for Xserve RAID Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Software Apple Xserve (Early 2008) DIY Procedure for Xserve RAID herunter. Apple Xserve (Early 2008) DIY Procedure for Xserve RAID Card Battery User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
073-1151 Rev. B 1
© 2007, 2008 Apple Inc. All rights reserved.
 Xserve (Late 2006/Early 2008)
Xserve RAID Card Battery
Replacement Instructions
Follow the instructions in this document carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Online instructions are available at http://www.apple.com/support/diy/.
Working Safely Inside the Xserve
Always touch the Xserve enclosure to discharge static electricity before you touch any
components inside the Xserve. To avoid generating static electricity, do not walk around the
room until you have nished working inside the server and have replaced the cover. To minimize
the possibility of damage due to static discharge, wear an antistatic wrist strap while you work
inside the Xserve.
Warning: Always shut down the Xserve and disconnect the power cords before opening
it to avoid damaging its internal components or the components you are installing. Don’t
open the server while it is turned on. Even after you shut down the Xserve, its internal
components can be very hot. Let it cool before you open it.
Tools Required
The only tool required for this procedure is a Phillips #1 screwdriver. You may also nd a small
atblade screwdriver useful in releasing the connectors on the power distribution board cable.
Removing the Xserve from a Rack
Alert users that the server will be unavailable for a period of time. 1.
Shut down the Xserve (see the Xserve User’s Guide for help) and then wait to let the Xserve 2.
internal components cool.
Warning: Always shut down the Xserve before opening it to avoid damaging its internal
components or the components you want to install or remove. Don’t open the Xserve
or try to install or remove items inside while it is turned on. Even after you shut down
the Xserve, its internal components can be very hot. Let it cool down for 5 to 10 minutes
before you open it.
Seitenansicht 0
1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - Xserve RAID Card Battery

073-1151 Rev. B 1© 2007, 2008 Apple Inc. All rights reserved. Xserve (Late 2006/Early 2008)Xserve RAID Card BatteryReplacement InstructionsFollow

Seite 2 - Opening the Xserve

073-1151 Rev. B 10© 2007, 2008 Apple Inc. All rights reserved.Xserve RAID Card BatteryLift the Xserve RAID Card battery straight up o its three m

Seite 3 - Power Supplies

073-1151 Rev. B 11© 2007, 2008 Apple Inc. All rights reserved.Installing the Replacement Xserve RAID Card BatteryImportant: Do not drop, disassemb

Seite 4 - 073-1151 Rev. B 4

073-1151 Rev. B 12© 2007, 2008 Apple Inc. All rights reserved.Replacing the Power Distribution Board Lower the replacement power distribution boar

Seite 5 - Airow Duct

073-1151 Rev. B 13© 2007, 2008 Apple Inc. All rights reserved.Replacing the Xserve RAID CardLower the Xserve RAID card into the enclosure at a sli

Seite 6 - Fan Array

073-1151 Rev. B 14© 2007, 2008 Apple Inc. All rights reserved.Reconnect the backplane-to-logic board I/O cable and the Xserve RAID Card battery ca

Seite 7 - Xserve RAID Card

073-1151 Rev. B 15© 2007, 2008 Apple Inc. All rights reserved.Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the

Seite 8 - 073-1151 Rev. B 8

073-1151 Rev. B 16© 2007, 2008 Apple Inc. All rights reserved.Closing the XserveReplace and secure the cover.1. Slide the Xserve back into the rac

Seite 9 - Power Distribution Board

073-1151 Rev. B 2© 2007, 2008 Apple Inc. All rights reserved.Unplug all cables from the Xserve. 3. Note: If you have trouble releasing a cable fro

Seite 10

073-1151 Rev. B 3© 2007, 2008 Apple Inc. All rights reserved.Removing the Installed Xserve RAID Card BatteryNote: Before removing the Xserve RAID

Seite 11 - 073-1151 Rev. B 11

073-1151 Rev. B 4© 2007, 2008 Apple Inc. All rights reserved.Power Distribution Board CableLocate the power distribution board cable. 1. Disconnec

Seite 12 - 073-1151 Rev. B 12

073-1151 Rev. B 5© 2007, 2008 Apple Inc. All rights reserved.Caution: The power distribution board cable connectors are tight and can be dicult t

Seite 13 - 073-1151 Rev. B 13

073-1151 Rev. B 6© 2007, 2008 Apple Inc. All rights reserved.Fan ArrayLoosen the two thumbscrews that secure the fan array to the enclosure. 1. No

Seite 14 - Replacing the Airow Duct

073-1151 Rev. B 7© 2007, 2008 Apple Inc. All rights reserved.Xserve RAID CardRelease the two locking levers on the front panel board cable connect

Seite 15 - Replacing the Power Supplies

073-1151 Rev. B 8© 2007, 2008 Apple Inc. All rights reserved.Release the thumbscrew that secures the Xserve RAID Card to the enclosure. 4. Note: T

Seite 16 - Closing the Xserve

073-1151 Rev. B 9© 2007, 2008 Apple Inc. All rights reserved.Power Distribution BoardLocate the power distribution board. 1. Release the thumbscre

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Software Apple Xserve (Early 2008) DIY Procedure for Xserve RAID
Software Apple Xserve (Early 2008) DIY Procedure for Drive Interc Bedienungsanleitung   (12 Seiten)
Software Apple Xserve (Early 2008) DIY Procedure for Logic Board Bedienungsanleitung   (31 Seiten)
Software Apple Logic Express 7 Bedienungsanleitung   (8 Seiten)
Software Apple Pages '08 Bedienungsanleitung   (246 Seiten)
Software Apple GarageBand Jam Pack 2: Remix Tools Tips Bedienungsanleitung   (4 Seiten)
Software Apple GarageBand Tutorial: Lesson 2 Bedienungsanleitung   (7 Seiten)
Software Apple Mac OS X v10.4 Tiger Bedienungsanleitung   (20 Seiten)
Software Apple QuickTime VR Bedienungsanleitung   (113 Seiten)
Software Apple Compressor or Qmaster Batch Monitor Bedienungsanleitung   (10 Seiten)
Software Apple Xserve (Early 2008) DIY Procedure for Fan Array wi Bedienungsanleitung   (7 Seiten)
Software Apple AppleShare IP 6.0 Bedienungsanleitung   (70 Seiten)
Software Apple Pages '08 Bedienungsanleitung   (266 Seiten)
Software Apple Numbers '08 Bedienungsanleitung   (316 Seiten)
Software Apple Final Cut Server 1.5 Bedienungsanleitung   (70 Seiten)
Software Apple Xserve Intel (Late 2006) Service Parts Kit Bedienungsanleitung   (28 Seiten)
Software Apple Xserve (Early 2008) DIY Procedure for Rear ID Tab Bedienungsanleitung   (0 Seiten)
Software Apple QuickTime 7.2 Bedienungsanleitung   (68 Seiten)
Software Apple Final Cut Pro 6 Bedienungsanleitung   (222 Seiten)
Software Apple Soundtrack Pro 2 Bedienungsanleitung   (625 Seiten)
Software Apple DVD Studio Pro 4 Bedienungsanleitung   (223 Seiten)
  • Rihac Professional Mariner Cruza Esorun Qvidium
  • Philips Aufnahmegeräte Samsung Telefone ICC Steckdosen Horizon Fitness Laufbänder Alesis Nein
  • Vision-fitness X6250HRT Lantronix UDS1100 Acer V243HQL Audio-technica ATW-49SP Source-technologies ST9620
  • Samsung SM-J260F Bedienungsanleitung Electrolux ESF8585ROX Bedienungsanleitung Sharp AR-200 Bedienungsanleitung Whirlpool GMA 6422/IX Bedienungsanleitung Acer V205HL Bedienungsanleitung