Apple G5 G5 Betriebsanweisung PDF herunterladen (Seite 55)

Chapter 3 Installing Your Server in a Rack 55

6 When all cables are in place, connect each one to its intended device.

Important: When connecting peripheral devices, be sure to allow adequate space at

the front and back of the server for proper airflow and access to the rack for servicing.

7 After all connections are complete, plug the power cord into a power source.

With the server in the rack and the cables in place, you can prepare to set up the

Mac OS X Server software.

Disconnecting Cables From the Server’s Back Panel

The compact size of the Xserve G5 system may make it difficult to disconnect a cable,

such as an Ethernet network connection or a fibre channel cable, from the back panel.

If you have difficulty compressing the plastic tab on the cable’s connector, use a small

tool such as a tiny flat screwdriver to compress the tab as you pull the connector from

its socket.

Warning: This equipment is intended to be electrically grounded. Your server is

equipped with a three-wire grounding plug—a plug that has a third (grounding)

pin. This plug fits only a grounded AC outlet. This is a safety feature. If you are

unable to insert the plug into the outlet because the outlet is not grounded,

contact a licensed electrician to replace the outlet with a properly grounded

outlet. Do not defeat the purpose of the grounding plug!

Because you are installing the server in a rack with other equipment, be certain

that the power outlet and any other equipment, such as a power strip, used with

the rack is designed to carry the electrical load of multiple devices. Check the

documentation for your rack for any special instructions.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 95 96

Keine Kommentare

Apple G5 G5 Betriebsanweisung Seite 55