Apple G5 G5 Betriebsanweisung PDF herunterladen (Seite 78)

78 Chapter 6 Installing or Replacing Server Components

6 Align the DIMM in the slot as pictured and push the DIMM down until the ejectors

snap into place.

Important: Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.

7 Install the second DIMM of the pair in the corresponding slot in the other bank.

8 Close the server and tighten its thumbscrews.

9 Reconnect the power cord and any cables that you disconnected.

Installing a PCI-X Card or PCI Card

You can add to the capabilities of your server by installing cards in its expansion slots.

The computer has two expansion slots, which accommodate Peripheral Component

Interconnect Extended (PCI-X) cards or PCI cards.

Be sure to check the documentation for any card to verify that is it compatible with the

Xserve G5 system. Some cards may need to be installed in a specific slot in the server.

DRAM DIMM (Your DIMM’s shape and components may vary.)

Ejectors

(They should be pushed outward and down

to be in the open position, as shown.)

he DRAM DIMM is designed to fit into

the slot only one way. Be sure to align the

notch in the DIMM with the small rib

inside the slot. With the ejectors in the

open position (as shown), push down

on the DIMM until it snaps into place.

he ejectors will automatically close.

Connectors Notch DRAM slot (1 of 8)

Rib (inside slot)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 95 96

Keine Kommentare

Apple G5 G5 Betriebsanweisung Seite 78